Description
These are dispersions of inorganic and organic compounds in a special grade
of unsaturated polyester resin vehicle, which cross links during curing with
commercial grades of Gel coat and GP resin systems.
These are dispersions of inorganic and organic compounds in a special grade
of saturated polyester resin vehicle, which functions as a plasticizer in
commercial grades of Epoxy resin systems.
Commercial epoxy resin systems vary between manufactures and hence the amount
of hardener required to cure the resin (Amine Equivalent Weight) varies. Addition
of any third component that is epoxy based will require the correct computation of
the hardener required. Usage of Epoxy Pigments eliminates the need to make such
computations.
Pigment Usage Levels
The following is the recommended usage level of Pigments with commercial
grades of molding resins. The percentage levels listed here is based on the
weight of the molding resin.
8%-12% Gelcoats
4%-6% Laminates
8%-10% Sheet/Dough Molding Compounds
1%-5% Translucent Pigments Usage
4%-6% Filled Castings
8%-10% Pultrusions
Not using enough pigments may lead to non-uniformity of color and other
surface defects. Higher pigmentation levels will provide better color uniformity,
color depth, brightness and longer durability.
Standard Paking : 1 kg.
